Business Research Ethics Essay

  Joseph J.C. DiCarlo was found guilty of embezzling $40,000 from a consulting firm in New York for suppressing a legislative report. This report unfavorably criticized the firm’s construction contracts. Joseph J.C. DiCarlo already had a tarnished reputation of a corrupt official, and unethical practices. Based on Josephs actions the state senators were the affected parties in this case study. As Joseph was found guilty the state senators at that time felt relieved that a person with his unethical practices would no longer have the power entrusted in him. The manner in which DiCarlo extorted money for the construction of the University of Massachusetts in Boston, and tried to sabotage a legislative report was all for personal gain. Joseph was voted in to seat by the public and entrusted to make ethical actions that would be in the best interest of the organization and the public. This case study, shows how greed and selfishness played a major role in the choices DiCarlo made , he however did not for see the investigation that led to his conviction. This conviction put an end to his career and was expelled as a senate in 1977. Although Joseph DiCarlo sealed his own fate, his actions were illegal, and unethical. With such a thin line between what is unethical and illegal it is usually up to the organization or research firms to determine if any research or action is would be characterized as unethical or illegal. Most businesses or and organizations strive themselves to instil ethical practices to their employees, it is unfortunately that Joseph DiCarlo was placed in a seat of power where some of these practices are not followed by the people who put them in place. Some organizations go as far as conducting yearly or even monthly trainings, to keep employees up to date with current policies and procedures. In any case an organization conducts these trainings to protect themselves from any liability, due to the employee’s unethical practices. In this case Joseph’s unethical practices resulted in his conviction, and liability to pay fines based on his actions. His unethical actions resulted in a $5,000 fine and one year in prison. Although, he did steal $40,000, but only paid back $5,000, the University of Massachusetts students.

Monitoring system

RFID technology which is a matured technology that has been widely deployed by various organizations as part of their automation systems. In this study, an RFID based system has been built in order to produce a time-attendance management system. This system consists of two main parts which include: the hardware and the software. The hardware consists of the motor unit and the RFID reader. The RFID reader, which is a low-frequency reader (125 kHz), is connected to the host computer via a serial to USB converter cable. The Time-Attendance System GUI was developed using visual basic.Net. The Time-Attendance Management System provides the functionalities of the overall system such as displaying live ID tags transactions, registering ID, deleting ID, recording attendance and other minor functions. This interface was installed in the host computer. Keywords: Radio-frequency identification, RFID technology, radio waves identification (RFID) is a matured technology that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency portion of the electromagnetic spectrum to uniquely identify an object, animal, or person.RFID hips contain a radio transmitter that emits a coded identification number when queried by a reader device. Some RFID tags can be read from several meters away and beyond the line of sight of the reader. The application of bulk reading enables an almost-parallel reading of tags. This small type is incorporated in consumer products, and even implanted in pets, for identification. The tag's information is stored electronically.The RFID tag includes a small RF transmitter which transmits an encoded radio signal to interrogate the tag, and receiver which receives the message and responds with its identification information. Some RFID tags do not use a battery. Instead, the tag uses the radio energy transmitted by the reader as its energy source. The RFID system design includes a method of discriminating several tags that might be within the range of the RFID reader. RFID can be used in many applications. A tag can be affixed to any object and used to track and manage inventory, assets, people, etc.For example, it can be affixed to cars, computer equipment, books, mobile phones, etc. The Healthcare industry has used RFID to reduce counting, looking for things and auditing items. Many financial institutions use RFID to track key assets nd automate compliance. Also with recent advances in social media RFID is being used to tie the physical world Copyright 2012 SAVAP International www. savap. org. pk www. ]ournals. savap. org. pk 168 with the virtual world. RFID in Social Media first came to light in 2010 with Facebook's annual conference.RFID is a superior and more efficient way of identifying objects than manual system or use of bar code systems that have been in use since the 1970s. Furthermore, passive RFID tags (those without a battery) can be read if passed within close enough proximity to an RFID reade r. It is not necessary to â€Å"show† the tag to the reader device, s with a bar code. In other words it does not require line of sight to â€Å"see† an RFID tag, the tag can be read inside a case, carton, box or other container, and unlike barcodes RFID tags can be read hundreds at a time.Bar codes can only be read one at a time. Radio frequency identification (RFID) is a matured technology that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency portion of the electromagnetic spectrum to uniquely identify an object, technologies. RFID tags are not an â€Å"improved bar code† as the proponents of the technology would like you to believe. An RFID system consists of three components which include: an antenna, a transceiver and a transponder (the tag). The antenna and the transceiver are often incorporated into one reader.The antenna uses radio frequency waves to transmit a signal that activates the transponder. When activated, the tag transmits data back to the antenna. The RFID can read the tag using Radio Frequency, meaning that the RFID reader can be read from a distance, right through your clothes, wallet, bags etc. An RFID tag consists of unique ID for each tag. The RFID technology has been in existence since the early 1920s. This technology has been used in libraries, museums, race timing, toll collection and contactless payment, tracking of persons and animals etc.The RFID attendance system is an automatic embedded system used in taking attendance of registered persons in a particular organization. The RFID attendance system offers an organization, the efficiency and convenience associated with RFID technology at a low cost. This method is fast as well as simple. Each employee uses an RFID card and the reader records the data when the employee enters or exits. RFID devices and software must be supported by a sophisticated software rchitecture that enables the collection and distribution of locatio n based information in near real time.A complete picture of the RFID attendance system combines the RFID Tags and readers with access to global standardized database, ensuring real time access to up-to-date information on the card. The card contains a unique identification number called an electronic product code (EPC). Nowadays, there are lots of companies around the world and some of them consist of workers up to 10 thousand or more. To handle a large number of workers may be a problem especially to get the attendance of the workers.The manual process means that henever a worker comes to work, he goes to sign at the time officer's table. This manual process has some flaws because in a case where a worker bribes the time officer or is familiar with him, the time officer may tamper with the attendance records. This would be a big problem in the company and might affect the productivity and management of the company. The suitable solution for this problem is by designing a system tha t will record attendance automatically. In this project, RFID system is used to record the numbers of employees' attendance automatically.The ID cards of the employees is embedded with RFID tag which is read by a reader. This RFID system is interfaced to a database through a computer. This method is more effective to prevent problem encountered when getting attendance manually. Below is the block diagram of an RFID attendance system. Related Works The use of Radio-frequency identification (RFID) technology in automated electronic environment and for tracking objects has been widely researched upon by researchers and deployed by various organizations as part of their automation systems.References [21] and [7] provide examples of a real RFID contact less data link deployments that utilize RFID technology for object tracking and automated data ollection solution. RFID is a technology that uses radio waves to transfer data from 169 an electronic tag, called RFID tag or label, attached t o an object, through a reader for the purpose of identifying and tracking the object In 1945, Leon Theremin invented an espionage tool (for spy activities) for the Soviet Union which retransmitted incident radio waves with audio frequency information.Sound waves vibrated a diaphragm which slightly altered the shape of the resonator, which modulated the reflected radio frequency even though this device was covert listening device, not an identification device or tag, it is considered to be a redecessor of radio frequency identification (RFID) technology because it was likewise passive, being energized and activated by waves from an outside source. Similar technologies such as the IFF (identification friend and foe) transponder developed in the United Kingdom, was routinely used by the allies in the World War 2 to identify aircrafts as friend or foe.Transponders are still used by most powered aircrafts to this day. Mario . W. Cardullo was the first to have received the United States p atent for an active RFID tag with re-writable memory on January 23, 1973 [4]. In that same year, Charles Walton, a California entrepreneur, received a patent for a passive transponder used to unlock a door without a key. A card with an embedded transponder communicates a reader near a door, when the reader detects a valid identification number stored within the tag, the reader unlocks the door.Walton licensed the technology to Schalge lock of San Francisco, a lock maker and other companies [1]. Time and attendance systems are a major part of todays human resource systems, take organization towards better human resource practice, systems and excellence. The implementation of time and attendance system has a lot f advantages for the manager. The kind of system that is implemented depends upon what the organization is trying to achieve by implementing the system. There are different types of automatic attendance systems; each type of system is suited to different needs and requirements [9].Some of the most common types include; biometric attendance system, magnetic stripe attendance system, barcode attendance system, and RFID attendance system. Barcode Attendance System The barcode system is a common type of time and attendance system through which the efficiency of measuring and tracking employees' time could be increased to a reat degree. With the automation through barcode technology, the errors previously provides high levels of accuracy and reliability in tracking of employee attendance.In addition, the costs associated with the installation of the system are not too much relative to the cost of payroll or attendance errors. The implementation of the barcode system is easy. Every employee is issued a badge/card in which there is a barcode. In order to check into or out of the company, the badge/card is swapped on the time clock, and the data is captured by the clock. This data from the clock can be downloaded by the manager or the administrator nd then used for updating and maintaining time and attendance records.The Universal Product Code (UPC) is a unique 12-digit number assigned to retail merchandise that identifies a product and the vendor. The Universal Product Code (UPC) on a product typically appears adjacent to its barcode, the machine-readable representation of the Universal Product Code (UPC). The UPC for a particular product is always the same. The first six digits is the vendor unique identification number. All the products that the vendor sells will have the same first six digits in their UPCs. The next five digits identify the product. The last digit is called the check digit.This is used to verify that the UPC for that specific product is correct. Each time that UPC is read, typically by a scanner reading the barcode, a calculation is done. And, if the check digit is different compared from the one that is calculated, then the computer knows that there is something wrong with the UPC. Figure 1 is a pictorial diagram of a barcode with its universal product code (UPC) [11]. Copyright 2012 SAVAP International 170 ISSN-L: 2223-9553 ISSN: 2223-9944 9553, Fig. l picture ofa barcode Biometric Attendance System This is the study of measurable biological characteristics.In computer security, biometrics refers to authentication techniques that rely on measurable physical characteristics that can be automatically checked. There are several types of biometric identification schemes which include:-face fingerprints, ecked. include: face retina, hand geometry, vein, voice etc. The computer uses any of these biometric identification schemes to determine who you are, and based your identity authorize [12]. Under this system, there is time and attendance software that is paired with a time clock for employees which uses biometric technology for authentication purposes.When these systems are in use, the employees can use their finger prints for clocking in and clocking out. This method has the great benefit that the entire process is easy as well as quick. Other advantages include elimination of the cost previously incurred in getting the employees cards. In the other systems that uses card other (magnetic stripe and barcode systems), there is an ongoing expense associated with the damage, misplacement and stealing of cards and the continuous need for their restoration and maintenance.Magnetic Stripe Attendance System In the magnetic stripe attendance system, data is encoded in the magnetic stripe of he employee card. When the card, is swiped through the employee time clock, the information in the card's magnetic stripe is recorded by the time clock. This system also reads one card at a time and also requires contact reads with the reader. Figure 2 is a pictorial diagram of a card embedded with magnetic strip. Fig. picture of a magnetic stripe card Radio Frequency Identification (RFID) A radio-frequency identification system comprises hardware shown in figure 3a & 3b, known as frequency interr ogators or readers and tags, also known as labels, as well as RFID software or RFID tags middleware. RFID tags are of two major types, which include Active Tag and Passive Tag. and Fig. sa RFID tag Fig. 3b RFID card and reader 171 RFID tags can be either passive, active or battery assisted passive. Passive RFID does not use a battery, while an active has an on-board battery that always broadcasts or activated when in the presence of a RFID reader.Most RFID tags contain at least two parts: one is an integrated circuit for storing and processing information, modulating and demodulating a radio-frequency (RF) signal, and other specialized functions; the other is an antenna for receiving and transmitting the signal. Depending on mobility, RFID readers are classified into two different types: fixed RFID and mobile RFID. If the reader reads tags in a stationary position, it is called fixed RFID. These fixed readers are set up specific interrogation zones and create a â€Å"bubble† of RF energy that can be tightly controlled if the physics is well engineered.This allows a very definitive reading area for when tags go in and out of the interrogation zone. On the other hand, if the reader is mobile when the reader reads tags, it is called mobile RFID. An Electrical Engineering student of the University of Malaysia; Mohd Firdaus Bin Mahyidin designed RFID technology students' attendance system 2008 [10], which only takes attendance of students and stores the information in the database. The block diagram of his project is shown figure 4. However, this system does not the incorporate a door unit which allows access to only registered users.Fig. 4: RFID Technology Students attendance system. Comparing Barcode with RFID is done on table 1 . Table 1: comparisons between Barcode and RFID 2 3 4 5 6 7 Barcode Rely on the user to make contact to the reader, hence cannot be read from a distance In Barcode, only one card read at a time is allowed. Embedded information cann ot be updated, hence the restriction of the repeated overwriting if the embedded election information for each card It does not allow for the increase technologies like surveillance cameras to be activated with an employee being in the vicinity.RFID Do not require contact with reader, hence can be read from a distance. Embedded information can be updated; this allows the repeated over-writing if embedded electronic information for each card. RFID has increased technologies like surveillance cameras to be activated in onjunction with an employee being in their vicinity. It is slower and requires time of sight to RFID is faster and does not require line of function. sight. It has lower data storage transponder. It has higher data storage.

Challenges That the Company Faces Essay Example | Topics and Well Written Essays - 2250 words

Challenges That the Company Faces - Essay Example This study stresses that  the company believes in innovating new types of products and services. Apple sells its products and services in different parts of the world. The company deals in electronic equipment industry. It is one of the strongest players in this industry. As per market capitalization Apple Inc became largest public trading company in 2014. In the electronic equipment industry new products and services are continuously developing. The companies in this industry use advanced technologies for developing innovative products. Apple wants to provide best experience to its customers by incorporating modern technology in its business and products.From this discussion it is clear that  Apple uses MR and MC for deciding the amount of goods it requires to produce. When the company thinks that MR is greater than MC then it produces one extra unit of output for getting additional revenue at a lower cost. But if the additional unit incurs more cost than the revenue it generate s, then the company prefers not to produce the extra unit of output (Hoag & Hoag, 2006). This condition arises when MR is less than MC. When MR=MC the company feels satisfied because at that stage it earns maximum amount of profit. This basic rule of profit maximization is followed by Apple. This profit maximization theory helps the firm in creating its strong position in the monopolistic market.  Apple Inc operates its business in different parts of the world and in various markets.

INTERNATIONAL ENVIRONMENTAL POLICY- Final Peper Essay

INTERNATIONAL ENVIRONMENTAL POLICY- Final Peper - Essay Example The members who got into the treaty hope to achieve a complete recovery of the ozone layer by the year 2050 (Benedick, 2007). c. Number of participants and the reasons for the level of participation. The protocol has managed to attract international co-operation exceptionally due to the widespread implementation as well as adoption of the treaty. The treaty has been ratified as perhaps one of the most successful agreements of international scale to date. The treaties that fall under the Montreal Protocol have successfully been ratified by the European Union as well as 197 other states. This therefore makes the protocol alongside the two ozone treaties involved the most ratified of all the treaties in United Nations history. Other participants in the treaty include the Cook Islands, Holy See alongside Niue. The protocol has its proceedings in major languages so that no one fells left out. The languages are French, English, Spanish, Russian, Chinese and Arabic. This is one of the major factors that contributed to the fact that many participants were attracted to the protocol. The other reason for such level of participation is the common goal that drives the desire to protect the earth from losing the all important ozone layer. The countries that went into the treaty, the latest entrants being South Sudan, all had the common purpose to work towards eliminating harmful substances and controlling emission of such substances that can greatly affect the ozone layer (Chasek, 2013). d. Compare the success of the Montreal Protocol to that of the Kyoto Protocol and address the reasons for any differences in terms of National Interests of those that elected to participate and those that have not. The differences witnessed between Kyoto protocol and the Montreal protocol is that the one in Montreal imposed on all countries strict restrictions from the start. That mostly differs from the mode of operation of the Kyoto protocol. The other difference that can be observed in t he two protocols is that strong incentives were created by the Montreal protocol with regards to participation and compliance if a country is to be part of the main agenda. Montreal also created a positive feedback system whereby each step aimed at reducing the depletion of the ozone layer as well as creating incentives whereby each country would feel involved in the process of decision making in regards to taking steps forward. This effort in the long run provided the participating countries with an avenue to place their trust on the efforts of fellow states and hence national interests in the Montreal protocol turned up to be higher than that of the Kyoto protocol (Dotto, 2006) 2. United Nations Conventions on the Law of the Sea. a. The issue of â€Å"Property Rights† as it relates to UNCOLS. This treaty arose from the third conference held by the United Nations that took place right between the years 1973 and 1982. The laws in this treaty tend to define responsibilities of countries on how they utilize the resources from the sea as well as the oceans of the world. The treaty laid basic guidelines for environmental conservation, conducting business alongside good use of marine resources found naturally. UNCLOS came into effect in the year 1994 after signing Guyana a year earlier. By October of 2012, the treaty enjoyed the company of 164 nations alongside the European Union. The UN is

Globalization Assignment Example | Topics and Well Written Essays - 250 words - 3

Globalization - Assignment Example Hence this can be seen as a positive from the domains of the World Trade Organization (Berberoglu 2005). The negative aspect of the World Trade Organization is that the not so rich countries are at loggerheads with this organization on a consistent basis, and thus the reason that there are serious disparities in the working of this global body. The critics therefore pinpoint the latter point because they believe that the drawbacks offered by the World Trade Organization are so severe that there are no chances for reverting back the time and hence bringing about any sanity within the relevant ranks. The two different viewpoints are very staggering and offer a differential perspective if seen with regards to the World Trade Organization. It is true that the World Trade Organization is indeed acting as a global organization and that globalization has happened for all the right as well as wrong reasons under the aegis of this

Family images Essay Example | Topics and Well Written Essays - 750 words

Family images - Essay Example th family issues unquestionably do grave harm to the image of family simply because they present an inadequate or even a deformed and a wrong outlook on the relationships between family members. Besides focusing on the failure of the marital enterprise, family problems such as infidelity, sexual activity outside of marriage, and the absence of an ethical and a religious vision of the marriage are omnipresent in all American magazines treating family issues. If we give a glance at most of the online American magazines that are so interested in the image of the family, we will find that the most recurrent theme is divorce. Nevertheless, there is always a tendency to present an ideal and a prototypical family for the common audience. In the Focus On The Family, an American family is introduced as being so happy and faithful to the teachings of Christianity. The daughter, who was trying to catch some fish is disappointed and is therefore asked to put her whole trust in God. â€Å"In my bewilderment, I realized that God was pursuing my daughter, wooing her heart with His indescribable grace. For years, I had been trying to say and do all the right things to prod her closer to God. But it was Samanthas heavenly Father, not her earthly one, who caused her to trust Him. Just as He filled the nets of two Galilean brothers long ago†¦ He sent a fish to my daughters line — and fed her growing faith.†1 While some American magazines try to help parents better guide their children to the right path, other magazines endeavor to organize American families lives by encouraging children to study well, eat healthy diets and have sufficient sleep. Such American magazines are targeting fresh couples who have just got initiated in marital life. â€Å"We believe that every child has the potential to succeed in school and in life! Our individualized program is tailored to each student’s needs, finding and addressing the gaps in student skills. Call today for a tutoring solution that

Technology Forecast Research Paper Example | Topics and Well Written Essays - 1000 words - 1

Technology Forecast - Research Paper Example It is for this reason that smart phone devices are ever power stingy. A Neuromorphic chip refers to minute microprocessors which are configured to replicate the work of the human brain. The neuromorphic chips replicate the functioning of the biological neurons that are found in the human brain. The chips provide an insight on how the brain of a rational human being processes information. If the technology is actualized, it would lead to the development of electronic systems that are extremely fast, utilize minimal power and can easily make sense of sensory input and undertake to deliver in real time the tasks that are user defined (Rothenbuhler, 2013). More significantly, devices that are based on the neuromorphic chip will have the ability to interact with the world in exactly the same manner a human being would. Robotic medical devices will be in a position to track a patient’s response to medication over a certain time period and learn to review the dosage limit and catch other problems just like a doctor would. Just by wearing a smartphone gear, it may work with the brain to establish who one is thinking about and in that instance place a call to that particular person. Alarms in the schedule might go off in the expected time even though such alarms were not preset. . Toby Delbruck and Shih-Chii Liu (2012) observe that conventional technology has always been far outpaced by biological efficiency and it is for this reason that neuromorphic engineering designers have set out to develop electronic systems which have a similar computational style with the human biological system. The authors observe that neuromoprhic engineers are already making notable milestones characterized by the ever increasing number of sensory applications and sensors that have the capacity to communicate through signals that resemble the neural spikes in a human brain. Other pointer towards the expected breakthrough and large scale deployment of the neuromorphic chips

THEORIES OF MOTIVATION Essay Example | Topics and Well Written Essays - 750 words

THEORIES OF MOTIVATION - Essay Example Their work has become generally predictable with little or no challenge, especially with the supervisor involving himself at the floor level for telling the workers what to do, and often doing it himself. The workforce needs motivation to get out of its present de-motivated state. Maslow’s theory of motivation with its emphasis on analyzing individual needs and psychological factors will help to find solution. This contrasts with Herzberg’s or McGregor’s theories that place greater importance on situation analysis and management style respectively. Key words: Motivation, Maslow, Herzberg, McGregor, needs, psychological factors, Theory X, Theory Y, Gen Xers, Millennials, relationship, team-spirit. Case Study: Sun-2-Shade - Theories of Motivation Case summary The Sun-2-Shade case reflects the situation whereby workers do not feel motivated in spite of the business flourishing, good pay and a supportive supervisor. The significant descriptive words in the case like boring job, resenting supervisor help and late-coming clearly point to the estrangement between the supervisor and his workers, who are said to be around his age group (Gen Xers and Millennials). There is an absence of team-spirit, no sense of belonging or accepting responsibility for their lackadaisical attitude. One needs to analyze the case in the light of theory of motivation vis-a-vis the supervisor’s approach and characteristics of the age group of the workers/supervisor. Using Abraham Maslow’s theory of motivation Maslow’s hierarchical nature of human needs point to what motivates a person at a particular stage of his/her career. For example, people at the bottom of the 7-stage pyramid of the hierarchy value the basic physiological needs more. When the lower stage needs are met, the relevant factors lose their importance as motivators and a higher degree of motivating factors come into play, which are more psychological nature. Thus, as they move up to, f or example, the fourth stage, self-worth and self-esteem become more relevant as ‘needs’ – in other words, motivating factors (Martin and Jumis, 2007, pp.72-75). Significantly, Sun-2-Shade workers seem to be yearning for such recognition having already achieved secure jobs, good pay and working in a progressive/growing company. A word about the interaction of the age factor is relevant. The supervisor and the workers are of the age group – Gen Xers (born 1965-‘76 period) and Millennials (born 1977-‘98 period) (Thielfoldt and Scheef, 2004). Obviously, the age group is a mix of the seniors of the former and juniors of the latter categories. Gen Xers prefer ‘flexibility and freedom’ while Millennials value ‘structured, supportive environment’ but can ‘expect and demand more’ (ibid.). Hence there are subtle differences in the groups of workers and this can point to the solution to the problem. Using Herzberg a nd McGregor theories Herzberg’s two factor motivation theory proposed that hygiene factors have the ability to reduce dissatisfaction while motivators increase job satisfaction (Anon., n.d, online). The hygiene factors like pay and benefits, job security, working conditions, company policies, etc. determine how an individual rates his job/employer against his own expectations. In the process of such assessment, the individual is less concerned about his own credentials and more concerned with what he is getting out of the job. The better the hygiene factors the more the satisfaction level, which then works as the basis for the motivators. The motivators like work content, recognition, promotion etc. help an individual to gain a sense of job satisfaction. Hence, the Herzberg theory supports the view that motivation cannot be achieved if the underlying hygiene factors are ignored. McGregor’

Cyclic Scheduling Essay Example | Topics and Well Written Essays - 5000 words

Cyclic Scheduling - Essay Example ic scheduling in flexible manufacturing systems is something that has to be well understood by all those involved with production management and researchers have tried to develop a variety of heuristics and algorithms for solving cyclic scheduling problems in flexible manufacturing systems. Cyclic scheduling problems are often complex and require computational optimization techniques for their solution and automated systems with scheduling engines help production managers to find optimal scheduling solutions in real-time. This research paper presents a brief discussion about cyclic scheduling in flexible manufacturing. I hereby certify that, except where cited in the text, this work is the result of the research carried out by the author of this study. The main content of the study which has been presented contains work that has not previously been reported anywhere. Scheduling refers to the concept of allocating available resources over time to effectively plan for the execution of production orders in a manufacturing facility with its available processing machines and manufacturing systems (Lankford, Chapter 9.8). Depending on the demand for that which is being manufactured, a master production schedule will be made available and scheduling meets the requirements for production that are stated in the master production schedule. Thus, if automobiles or cellular phones are being manufactured in a facility, then the daily, monthly or weekly production output for the previously mentioned outputs will be mentioned in the master production schedule, as determined by the market or supplier commitments. However, the employed manpower, processing machine or production line capacity and material for production must be adequate for the required levels of production and this means that scheduling is about optimally assigning available resources to meet pr oduction targets. Thus, scheduling is more complex than the mere execution of jobs for production and depending on the

The First World War Satire Essay Example for Free

The First World War Satire Essay How does Blackadder Goes Forth satirize the First World War and how does it fit into the situation comedy genre as a whole? A situation comedy, or a sit-com, is a comedy series projected from radio or television. The programme itself is based upon how characters react to unusual or comic situations. Situation comedies follow specific characters that encounter situations and then they try and deal with them. In each episode of a situation comedy, the story follows the same characters. Most situation comedies are set in a specific place that forms the set for every episode. A flat is commonly used in situation comedies for the set. Popular examples of flat share situation comedies are Only Fools and Horses and Friends. These two sit-coms are extremely popular, and both are set in a flat. Situation comedies used to form gaps in between more important shows. This was soon changed as the demand for sit-coms massively grew. They are now one of the most dominant television genres around. Blackadder is a situation comedy. It is a most unusual sit-com as in each series the scene is based on a different timeline. Blackadder has been through Elizabethan times, many other timelines and important historical times, and then ends up with the final series in World War One. Most other sit-coms dont do this instead each of their different series is set on the same timeline and in the same place. This is one of the points that make Blackadder different, as in each series the eager watchers dont know what to expect. Blackadder goes forth is also different from the usual sit-com as it is the same situation every episode. The majority of sit-coms dont do this, instead they are based in the same place, but with a different humorous situation with which the characters have to deal with. In Blackadder Goes Forth the situation is exactly the same just the characters deal with it differently. The situation is that Blackadder himself is trying to escape and relieve himself of the hideous atrocities of the First World War. Of course like in any other sit-com, things go very wrong for him and comic experiences pop up along the way. Altogether Blackadder fits into the situation comedy genre in a sense, as it is a sit-com, but is totally different from the majority of other sit-coms. Blackadder has a different story every episode, involves the same characters in every episode, and takes place in the same place in every episode. The differences of Blackadder to the mainstream of sit-coms are shown obviously. This is shown in many ways; one is that Blackadder is set in different historical time in each different series. This attracts viewers to watch Blackadder, because they want to see something new rather than the usual flat share show with people shouting bawdy jokes. This is why the producers of Blackadder have made the show different from the usual sit-com. Another reason why Blackadder is different from most sit-coms is that the situation is the same in every episode of Blackadder. Nearly every other sit-com has different situations and different ways in which the characters tackle these situations. Blackadder Goes Forth doesnt. The situation is of Blackadder trying to escape the war in any way he can. He tries lots of different approaches to deal with his problem, but every episode he fails. This becomes very amusing as no matter how hard he tries; he just cant get out of fighting in the war. Another very important feature in Blackadder that is dissimilar to other sit-coms is the way that even though the scene is set on a historical time scale, Blackadder still has 20th Century views. All the other characters in the whole programme have views of life that relate to the time scale that they are set in, while Blackadder has views of life that we would. This is what makes Blackadder so hilarious to us, as we can relate to precisely what Blackadder is saying and thinking, while all the other characters in the play are trapped in that time zone with historical thoughts, Blackadder makes fun of all the stupid things that happened within that time zone and has the same views and points to express as we do. The one other reason why Blackadder Goes Forth doesnt fit well into the genre of situation comedies is that Blackadder uses satirical comments and elements throughout the programmes. This makes the programme extremely funny, but also makes a point in which we can understand and learn from. Satire is using humour or exaggeration to show what it is bad about a person or thing. Blackadder uses this strongly in all of its episodes in all of its series. Blackadder: Well George, I strongly suspect your long wait for certain death is nearly at an end This is portraying the scene that everyone who wanted action in the war is going to be sent to his or her deaths. The reason why the produces of Blackadder decided to make different historical time scales for their series was possibly so they could use satire to make a point about those different time lines. With Blackadder using satire in this way it gives viewers the humour and hilarity that we get and love from all sit-coms, but also spreading a point across the country about how bad those situations were and how badly our ancestors handled them. So the reason why Blackadder is a funny character is because he is the only sane man and fools surround him. This makes us learn from mistakes that have happened in the past but also provides us with the amusement that we want when we watch a sit-com. Satirical elements are present in Blackadder, even in the title sequence at the start of each episode. There are many satirical elements in the title sequence; the first one being the two rows of five men marching after a sergeant majors command. The first row of soldiers is bandsmen wearing the traditional red colours of the English army. The second row of soldiers is armed forces, wearing the up-to-date camouflage green. This is satirizing the tactics of the British army. The way in which Blackadder does this is by having the bandsmen in red marching in front of the armed forces, it symbolizes that the bandsmen are more important. It shows that playing instruments and wearing smart colours and clothes into battle is more important then staying undetected with camouflage and looking scruffy. This satirizes British tactics and approach to war. It also shows that the British army is out of date, as fighting in bright colours was a thing of the past, showing that the commanders were just old forgotten war heroes who needed to be slapped up-to-date if they wanted to keep their men alive. It also satirizes the fact that blood is to come for those soldiers are behind. The blood red of the bandsmen shirts marching in front of the armed forces means that blood is to come for them and pour from their bullet stricken bodies. There is a character in Blackadder Goes Forth, named baldrick. In the title sequence he is out of place in the band and is franticly running around to find his place. Baldrick is a private in the army. This satirizes the privates as being stupid and out of place fighting in such a war. Also that Baldrick is in the band, and not in the armed forces row like he should be satirizes that he is out of place in the army, and will do more good playing a triangle in a parade. As baldrick is out of place, there is still no place for him in the ranks of men as both are of equal numbers and there is no more room for him. This emphases the point even more that the dim privates are out of place in the war, and they shouldnt be put there, as they dont understand it. How can a man be expected to shoot if he cant even find a place in a band? This is the satirizing point that Blackadder is making when the character baldrick is out of position. Also in the title sequence General Melchett and Captain Darling are standing atop a podium watching the soldiers march. General Melchett is wearing cavalry clothes. This satirizes the generals in the war by showing that they are out of touch and out of date with the tactics of war. They still think that cavalry are the best option to winning a battle, but now that machine guns have been invented cavalry are useless. Yet the generals do not know this, and assume that old tactics are good, but they arent. Captain Darling is cowering behind the General. This satirizes the Captains in the war. This shows that they were cowards and used the Generals as protection to stop them having to fight. Further on in the title sequence Lieutenant George is smiling in a childish way as he marches forwards. This is satirizing the pompous Lieutenants. Showing that they believe that war is just a game, and they should enjoy every minute off it. This is of course the wrong attitude to take to war, as you killed be obliterated any second. Aside from the title sequence, the whole programme contains satirical elements throughout its course, one of these being the living conditions of the soldiers shown in the programme. Blackadder opens up the programme of the last ever episode of Blackadder goes forth with: Hullo, Somme Public Baths. No running, shouting or piddling in the shallow end. Aside from this being droll, it also makes a great satirical point on how the living conditions of the soldiers actually were. The soldiers were caked in mud up to their elbows and sopping wet with the continuous moral beating rain. It satirizes how bad the living conditions really were by basically saying it was wet, and the rain was the least of the soldiers problems at that time. Private baldrick explains that the coffee that all the soldiers have been drinking for months is actually hot mud. He also describes what each of the elements of the coffee is. He states that the milk is saliva, the sugar is dandruff and although he doesnt state what the chocolate sprinklings are, he gives us a very good idea of what they could be! All this satirizes the living conditions of the poor soldiers that had to live in here day in and day out. They were soaked in rain, encrusted in mud, and drinking hot mire with all manner of things inside, but worst of all being pounded by shells all day long. Blackadder Goes Forth also satirizes everyones attitudes to war. Starting with the Generals, they had the worst attitude towards war. As the Generals were not in the trenches and not experiencing the horrors of war, they had no idea what it was like. The generals still thought war was what it used to be, fighting against unarmed enemies that cant win the fight. As general Melchett explains, That pigmy woman with the sharpened mango could have seriously Apart from this being comical, it has a real satirizing point to it. The old wars in which the English used to fight were against aborigines with no weapons other than maybe a spear. The English couldnt really loose a battle against such little an opposition, and from that day they thought they could win any battle that faced them, as they were full of themselves over their glorious victories. This is the attitude that the generals still possessed when commanding in World War One, especially in the Somme area that Blackadder goes forth is set. It satirizes the generals lack of understanding of modern warfare, and shows how they believe they will always win. In the episode Goodbyeee, Field Marshall Haig is playing with toy soldiers. This is satirizing the generals perspective of warfare, and apart from it being hilarious it proves just what the generals were like. They thought that war was a game and that it didnt matter who won or lost. This is shown as Haig knocks over a handful of the plastic soldiers on his model battlefield. Blackadder himself satirizes the advance and progress the army has made while at war, Weve advanced as far as an asthmatic ant with heavy shopping. Apart from this being droll, it satirizes how far the army progresses with such stupid and out of date tactics and childish generals. This relates highly to World War One as the army progressed about a few inches a year, as the generals just didnt know what to do. Another main thing that is satirized is the ranks of different troops. With the generals, they thought that war was just a game. This is shown and satirized in Blackadder by the way the general plays with toy soldiers. He used this as his tactics, moving individual toys and then knocking them over in one fell swoop. This actually shows that he expected his men to die, but sent them in regardless of the consequences, as he was bored of sitting in one place for a long period of time. Being incredibly child-like satirizes the lieutenants. This is shown in the character George. He is satirizing the pompous upper-class lieutenant. He always has a silly grin on his face and relates everything that happens in the war to a well know game of some sort. He even states that he played tiddly winks when signing up to volunteer for the war. He makes such remarks as by saying, we ducked and we dived. This is satirizing views of many soldiers in the war, as they just didnt have a clue about what it was really like. They just thought it was like participating in a sport match, and whatever the outcome, no one would get hurt, but how wrong they were. The other rank that is displayed and satirized in Blackadder is the private. Baldrick plays this role, and acts as the dim private, which is exactly what he is. He is always one step behind everyone else, in the mental way, and in the literal way. As in the title sequence he is behind everyone, and in the speeches he is behind everyone. He is satirizing the low-class dim private. At the end of the last episode Goodbyeee, just before they are about to go over the top, baldrick is more concerned about getting a splinter while climbing the ladder then getting mowed down in a hail of lead by a machine gun. This is because he doesnt understand what is going on. This is satirizing the fact that the dim people shouldnt be there, because if they dont understand what they are doing, how can they possibly fight? Captain Blackadder plays the other rank. He is the only commonsensical man in the whole warfare situation. This is how Blackadder is made funny, as he satirizes everything around him and makes fun of everything. He shares our views of the war, and tries in vain to get out of fighting just as we would, but to no amend, as the generals cant understand why he would possibly not want to go out and fight. This satirizes the generals lack of understanding. Fools surround Blackadder, this satirizes that everyone fighting was a fool, and with such stupid people everywhere, how can they win the war. It also satirizes that no one understands the war, no matter how clever or how high rank. And that everyone is as stupid as the private as they have no idea to fight a war more than he does. The equipment is the last thing that is satirized. This is done by the sticks that the higher ranking officers hold. These sticks do nothing at all. I wouldnt want to face a machine gun without one of these George explains to Blackadder. This is satirizing the fact that some of the equipment had no purpose, and some of the people didnt have a clue what a machine gun could actually do to you.

RPS in Galaxy Clusters Analysis

RPS in Galaxy Clusters Analysis Jellyfish:  A  spectroscopic  study  of  ram-pressure  stripping  in  massive  galaxy  clusters* ABSTRACT We continue our exploration of ram-pressure stripping (RPS) in massive galaxy clusters at z>0.3 by assessing the spectroscopic properties of RPS candidates selected previously based on their morphological appearance in Hubble Space Telescope images. We confirm cluster membership for 55 of our candidates, thereby tripling the number of RPS candidates known at z>0.2. Although many of these systems are too faint and too distant for the kind of in-depth investigation required to unambiguously confirm or refute the presence of RPS, the ensemble properties of our sample are consistent with increased star formation, and many of the selected galaxies exhibit visible debris trails. Specifically, about two thirds of all galaxies exhibit line emission ([OII]ÃŽÂ »3727AËÅ ¡ , HÃŽÂ ², and, where observationally accessible, HÃŽÂ ±) consistent with ro- bust star-formation rates that significantly exceed those expected for systems on the galaxy main sequence. We find no significant depe ndence of either the presence of line emission or the inferred star-formation rate on the relaxation state of the host cluster. Although we caution that our sample may contain not only galaxies undergoing RPS by the diffuse intra-cluster medium (ICM), but also minor mergers located at the low-density cluster outskirts and merely projected onto the cluster cores, we expect our results to facilitate and inform realistic process models of the stripping process by providing the first statistically significant sample of RPS candidates in truly massive clusters. While extremely rapid removal of the intrastellar medium is not ruled out by our findings, extended periods of triggered star formation are clearly an integral component of the physics of ICM-galaxy interaction in massive clusters. INTRODUCTION Spiral and elliptical galaxies are both commonly observed in the universe but inhabit (and dominate) very different environments. The inverse correlation between spiral fraction and density of the environment has long been established based on both galaxy mor- phology and colour (Dressler 1980; Baldry et al. 2006) and is so pronounced as to suggest causation. Since the preponderance of red, elliptical galaxies is not limited to the densest environments (i.e., the cores of massive galaxy clusters) but is notable already in groups of galaxies (Blanton Moustakas 2009), several phys- ical mechanisms may be responsible for the observed segregation of galaxy types and appear to be have been at work for several Gyr, as evinced by the steady increase in the dominance of ellipticals in  clusters from zà ¢Ã‹â€ Ã‚ ¼1.5 to the present day (Scoville et al. 2013). * Most of the data presented herein were obtained at the W.M. Keck Ob- servatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California, and the National Aero- nautics and Space Administration. The observatory was made possible by the generous finical support of the W.M. Keck Foundation. Although simulations have indicated that elliptical galaxies can form directly through spherical collapse of dark-matter halos in high-density environments (e.g. Navarro Benz 1991), it is widely accepted that transformations of galaxies from late to early types are central to the creation of the Hubble sequence. These occur in a range of environments and, most likely, over a range of character- istic timescales. While slow-acting gradual effects such as galaxy harassment (Moore et al. 1996, 1998) are bound to contribute, more violent interactions have been shown to be highly effective in turning disk galaxies into spheroids. In modestly dense environ- ments with commensurately modest relative galaxy velocities, i.e., in galaxy groups and at the outskirts of more massive galaxy clus- ters, galaxy mergers as predicted by Holmberg (1941) and explored in numerical simulations (e.g., Toomre Toomre 1972; Barnes Hernquist 1992, 1996; Mihos Hernquist 1996) can create a wide range of remn ants, including spheroidal galaxies (Toomre 1977; Hammer et al. 2009). By contrast, at the extreme opposite end of the density range where galaxies move too fast to have a signif- icant cross section for merging, ram-pressure stripping (RPS) by the diffuse intra-cluster medium (ICM) has been predicted (Gunn   Gott 1972), simulated (e.g., Farouki Shapiro 1980; Vollmer et   al. 2001; Roediger Hensler 2005; Domainko et al. 2006; Kron- berger et al. 2008; Bekki 2009; Tonnesen Bryan 2010), and ob- served across a wide range of wavelengths. Numerous studies have established that RPS is capable of rapidly displacing and removing gas from spirals falling into galaxy clusters (e.g., White et al. 1991; Rangarajan et al. 1995; Veilleux et al. 1999; Vollmer et al. 2008; Sun et al. 2010). We here present new results from an observational study de- signed to identify and characterise RPS events in massive clusters at intermediate redshift. Our project is motivated by the fact that, while RPS has been well studied in the local Universe (e.g., Sun et al. 2006; Sun, Donahue Voit 2007; Merluzzi et al. 2013; Fuma- galli et al. 2014; Poggianti et al. 2016), work at higher redshift has advanced more slowly, due to the obvious challenges in attaining commensurate signal and spatial resolution (but see Poggianti et al. 2004; Cortese et al. 2007; Moran et al. 2007; Owers et al. 2012). It is only at z>0.2, however, that the volume probed by any clus- ter survey becomes large enough to contain a significant number of truly massive clusters (systems more massive than Coma), i.e., clusters that allow us to study RPS over the full range of environ- ments, from the only mildly overdense cluster outskirts to extreme densities in the core regions that are never reached in local cluster s like Virgo. In this paper we examine the spectroscopic properties of galaxies tentatively identified as undergoing RPS in massive galaxy clusters at z>0.3. All clusters considered for this work were iden- tified by their X-ray emission and optically confirmed in the course of the Massive Cluster Survey (MACS; Ebeling et al. 2001, 2007, 2010; Mann Ebeling 2012). Potential stripping events were se- lected based on the morphology of galaxies in images of MACS cluster cores obtained with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope (HST) (see Repp Ebeling, in preparation, for an overview of this dataset). In Ebel- ing et al. (2014, hereafter E14) we presented a first sample of six textbook cases of RPS identified visually in these data and, ow- ing to their appearance, referred to as jellyfish (Fig. 1). Our sec- ond paper (McPartland et al. 2016, hereafter M16) defined a cus- tomized set of morphological selection criteria used to compile a larger sample of 223 potential RPS candidates and examined the spatial distribution and apparent projected direction of motion of the most plausible candidates. In this third paper, we present, dis- cuss, and interpret the results of extensive spectroscopic follow-up observations of the M16 sample. Our paper is organised as follows: After a brief introduction in  §1,  §2 describes the setup and execution of our spectroscopic  follow-up observations of RPS candidates, the data reduction, as well as our criteria to assess cluster membership for any given  galaxy. In  §3 we derive fundamental spectral properties of the con-firmed cluster members, infer star-formation rates, and estimate their stellar mass.  §4 compares the properties of RPS candidates  with those of the general population of star-forming galaxies, dis- cusses physical triggering mechanisms, and investigates correla- tions between the star-formation rate of RPS candidates and the relaxation state of the host cluster. We summarise our findings in  Ãƒâ€šÃ‚ §5. Throughout this paper we adopt the concordance ΆºCDM cos-mology, characterised by à ¢Ã¢â‚¬Å¾Ã‚ ¦m= 0.3, à ¢Ã¢â‚¬Å¾Ã‚ ¦ÃƒÅ½Ã¢â‚¬ º = 0.7, and H0 = 70 km sà ¢Ã‹â€ Ã¢â‚¬â„¢1 Mpcà ¢Ã‹â€ Ã¢â‚¬â„¢1. Figure1.HST/ACS snapshot image of MACSJ0451-JFG1, a textbook case of ram-pressure stripping from the E14 sample. The red and yellow arrows mark the inferred direction of motion in the plane of the sky and the di- rection to the cluster centre, respectively. Note that the tell-tale jellyfish morphology of this z=0.43 galaxy is readily discernible only thanks to the superb resolution of HST/ACS. (Reproduced from E14) SPECTROSCOPIC OBSERVATIONS AND DATA REDUCTION The targets of our spectroscopic follow-up observations were drawn from the set of 223 galaxies tentatively identified by M16 as undergoing ram-pressure stripping. We refer to M16 for a detailed discussion of the morphological criteria applied to select these can- didates from a master catalogue of over 15,000 galaxies detected in short HST/ACS exposures in the F606W and F814W bands of 63 MACS clusters in the redshift range of 0.30.7. A comprehen- sive description of the HST observations used by M16 is provided by Repp Ebeling (in preparation). Since most of the RPS candidates from the list of 223 were targeted by us in spectroscopic observations of MACS clusters that supported several complementary research projects, compromises had to be made in the design of the observations. In order to max- imise scientific returns, clusters that feature large numbers of tar- gets for each of the different projects were given priority, resulting in a bias in favour of clusters with multiple RPS candidates. In ad- dition, the simultaneous focus on many targets made it impossible to optimise the orientation of individual slits or even the position angle of the entire mask for the study of RPS candidates. Keck/DEIMOS observations All spectroscopic data for this work were obtained with the Deep Imaging Multi-Object Spectrograph (DEIMOS; Faber et al. 2003) on the Keck II 10m telescope on Maunakea. All multi-object spec- troscopy (MOS) masks used 1//-wide slits of at least 8//length, i.e., long enough to allow sky subtraction from in-slit data. Spectra were obtained using the 600 l/mm Zerodur grating set to a central wavelength of 6300AËÅ ¡ ; the GG455 blocking filter was employed to prevent second-order contamination at ÃŽÂ »>9000AËÅ ¡ . Exposure times  ranged from 3ÃÆ'-600 to 3ÃÆ'-1200 seconds. The seeing during these  observations was typically 0.8//. All data were reduced with the DEIMOS DEEP2 pipeline (Cooper et al. 2012; Newman et al. 2013), creating sky-subtracted and wavelength-calibrated one- and two-dimensional spectra. Redshifts were determined from the one- dimensional spectra using elements of the SpecPro software pack- age (Masters Capak 2011). Overall 110 RPS candidates were observed in 26 MACS clus-ters. Cluster membership We establish (likely) cluster membership by comparing the differ- ence between an RPS candidates redshift and the systemic redshift of the cluster with the cluster velocity dispersion. The latter is com- puted from all galaxy redshifts measured for the respective cluster in the course of the extensive spectroscopic follow-up work per- formed by the MACS team; a description of the underlying data and of the procedure employed to determine robust velocity dispersions for MACS clusters is provided by Repp Ebeling (in preparation). Although it is possible that some of the galaxies for which we rule out cluster membership are in fact still undergoing RPS within their local environment in the fore- or background of the respective MACS cluster, the majority of such non-cluster members are more likely to owe their disturbed optical morphology (and thus their selection in M16) to merger events or to gravitational lensing. In the following, we thus limit the term RPS candidates to galaxies classified as likely cluster members based on their radial velocity within the comoving cluster rest frame. Spectral corrections and flux calibration The reduced spectra created with the DEEP2 pipeline are wave- length-calibrated and thus allow redshift measurements that are ac- curate to within the limits set by the instrumental setup and the pre- cision of the dispersion solution. The determination of line fluxes and, in particular, line-flux ratios across a significant wavelength range, however, require flux-calibrated spectra. In addition, flux lost during the data-reduction process (due to CCD defects, non- optimal definition of spectral apertures, and, importantly, the finite slit width) needs to be recovered, if the measured line fluxes are to be interpreted as characteristics of the observed galaxy as a whole. Whereas corrections for missing flux are fairly straightforward to apply, flux calibration is notoriously difficult for multi-object spec- trographs (especially when the respective observations were not performed at the parallactic angle), owing to spatial variations in the instrument response across the field of vie w covered by the slit mask. Before flux calibration is performed, we visually inspect the two-dimensional spectra of all RPS candidates classified as likely cluster members. We manually mask out the spectral traces of non- target sources falling serendipitously into a slit, fill in bad detector columns, and re-extract the target spectra within an aperture that maximizes the object flux at all wavelengths. We then resort to external means to calibrate these spectra by tying the latter at two wavelengths to the photometry obtained for the respective galaxy with HST/ACS in the F606W and F814W passbands. To this end, we convolve the HST images in these two filters with a Gaussian whose full width at half maximum is matched to the average seeing during our DEIMOS observations and then integrate the flux within the DEIMOS slit (Fig. 2). The re- sulting linear calibration, illustrated in Fig. 3, achieves two goals: it Figure2.Example of the procedure applied to obtain accurate absolute photometry for the flux entering a slit on our MOS masks. Left: HST/ACS image of an RPS candidate in the F606W filter; overlaid are isophotal flux contours (green) and the slit as positioned during the DEIMOS observation. Right: As left, but convolved with a Gaussian kernel that mimics the seeing of the groundbased observation and rotated to align the slit with the image axes. 80 3000 250060 2000 40 1500 1000 20 500 00 40005000600070008000900010000 wavelength (A) Figure 3.DEIMOS spectrum of one of our RPS candidates before and af- ter flux calibration and slit size correction. The green and red lines show the throughput (in arbitrary units) of the ACS/F606W and F814W filters, respectively, used to anchor the flux calibration. (1) crudely corrects for wavelength-dependent variations in the to- tal throughput of our observational setup; and (2) extrapolates the spectrum actually observed through the slit to the spectrum of the entire galaxy. Note that the validity of the latter correction rests on the implicit assumption that the spectrum recorded within the slit is representative of that of the galaxy as a whole. Although this as- sumption is not necessarily well justified, it is widely applied and ensures consistency and comparability between line fluxes (and de- rived properties like star-formation rates) obtained in studies using different instrumental setups and observational strategies. PHYSICAL PROPERTIES OF RPS CANDIDATES Stellar mass In order to establish the locus of our RPS candidates within the general population of star-forming galaxies, we need to ensure that comparisons are made only between galaxies of comparable stellar mass. While the stellar mass of galaxies in our sample cannot re- liably be determined from only the HST/ACS data in the F606W  and F814W used for their original selection by M16, or from the optical spectroscopy within the à ¢Ã‹â€ Ã‚ ¼5000 à ¢Ã‹â€ Ã¢â‚¬â„¢9000AËÅ ¡ range described in Section 2, photometry across a wider spectral range that extends into the near-infrared (NIR) regime is well suited to constrain the spectral-energy distribution (SED) of galaxies and thus their stel- lar masses. For a significant fraction (QUANTIFY) of our cluster fields, the required data are available thanks to imaging observa- tions of MACS clusters with the NIR channel of HSTs Wide-Field Camera 3 (WFC3) performed for the CLASH project (Postman et al. 2012) and the MACS SNAPshot programs GO-12188 and -12884 (PI: Ebeling) described in Repp Ebeling (in preparation). The resulting photometry in the XXX passbands (CLASH) for 15 of our RPS candidates, and in the F606W, F814W, F110W, and F140W filters (SNAPshot programs) for an additional 17 galaxies, is fit with synthetic spectral templates using LePhare (Arnouts et al. 1999; Ilbert et al. 2006), an SED modeling code developed pri- marily for the determination of photometric redshifts of galaxies in the COSMOS field. Emission-line fluxes and star-formation rates 3.2.1   Extinctioncorrection DISCUSSION BPT diagram RPS candidates and the galaxy main sequence Properties of the host clusters CONCLUSIONS ACKNOWLEDGEMENTS We thank Elke Roediger for helpful discussions on the latest in nu- merical simulations of ram-pressure stripping and how to further constrain them via imaging and spectroscopic observations. Most of the data presented herein were obtained at the W. M. Keck Ob- servatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California, and the National Aeronautics and Space Administration. The observa- tory was made possible by the generous finical support of the W. REFERENCES Abramson A., Kenney J.D.P., Crowl H.H., Chung A., van Gorkom J.H., Vollmer B., Schiminovich D., 2011, AJ, 141, 164 Arnouts S., Cristiani S., Moscardini L., Matarrese S., Lucchin F. et al., 1999, MNRAS, 310, 540 Baldry I.K., Balogh M.L., Bower R.G., Glazebrook K., Nichol R.C., Bamford S.P., Budavari T., 2006, MNRAS, 373,469 Balogh M.L., Navarro J.F., Morris S.L., 2000, ApJ, 540, 1 Barnes J.E., 1989, Nature, 338, 123 Barnes J.E. Hernquist L., 1992, ARAA, 30, 705 Barnes J.E. Hernquist L., 1996, ApJ, 471, 115 Bekki K., Couch W., Shioya Y., 2002, apj, 577, 651 Bekki K., 2009, mnras, 399, 2221 Blanton M.R. Moustakas J., 2009, ARAA, 47, 159 Cooper M.C., Newman J.A., Davis M., Finkbeiner D.P., Gerke B.F., 2012, ASCL, 1203.003 Cortese L., Marcillac D., Richard J., Bravo-Alfaro H., Kneib J.-P., Rieke G., Covone G., Egami E. et al., 2007, MNRAS, 376, 157 Dressler A., 1980, ApJ, 236, 351 Domainko W., Mair M., Kapferer W., van Kampen E., Kronberger T., Schindler S., Kimeswenger S., Ruffert M. et al., 2006, aËÅ ¡, 452, 795 Ebeling H., Edge A.C., Henry J.P., 2001, ApJ, 553, 668 Ebeling H., Barrett E., Donovan D., Ma C.-J., Edge A.C., van Speybroeck L., 2007, ApJ, 661, L33 Ebeling H., Edge A.C., Mantz A., Barret E., Henry J.P., Ma C.-J, van Speybroeck L., 2010, MNRAS, 407, 83 Ebeling H., Stephenson L.N., Edge A.C., 2014, ApJ, 781, L40 Faber S.M. et al., 2003, in Tyson J.A. Wolff S., eds, SPIE Conf. Ser. Vol. 4836, Instrument Design and Performance for Optical/Infrared Ground-based Telescopes. SPIE, Bellingham, p. 1657 Farouki R. Shapiro S.L., 1980, ApJ, 241, 928 Fumagalli M., Fossati M., Hau G.K. et al. 2014, MNRAS, 445, 4335 Gunn J.E. Gott J.R.I., 1972, ApJ, 176, 1 Hammer F., Flores H., Puech M., Yang Y.B., Athanassoula E., Rodrigues M., Delgado R., 2009, aËÅ ¡, 507, 1313 Holmberg E., 1941, ApJ, 94, 385 Ilbert O., Arnouts S., McCracken H.J., Bolzonella M., Bertin E. et al., 2006, aËÅ ¡, 457, 841 Kronberger T., Kapferer W., Ferrari C., Unterguggenberger S., Schindler S., 2008, aËÅ ¡, 481, 337 Mann A.W. Ebeling H., 2012, MNRAS, 420, 2120 Masters D. Capak P., 2011, PASP, 123, 638 McPartland C., Ebeling H., Roediger E., Blumenthal K., 2016, MNRAS, 455, 3 Merluzzi P., Busarelllo G., Dopita M.A., Haines C.P., Steinhauser D., Mercurio A., Rifatto A., Smith R.J. et al., 2013, MNRAS, 429, 1747 Mihos J.C. Hernquist L., 1994, ApJ, 425, L13 Mihos J.C. Hernquist L., 1996, ApJ, 464, 641 Moore B., Katz N., Lake G., Dressler A., Oemler A. 1996, Na- ture, 379, 613 Moore B., Lake G. Katz N. 1998, ApJ, 495, 139 Moran S.M., Ellis R.S., Treu T., Smith G.P., Rich R.M., Smail I., 2007, ApJ, 671, 1503 Navarro J.F., Benz W., 1991, ApJ, 380, 320 Newman J.A., Cooper M.C., Davis M., Faber S.M., Coil A.L., Guhathakurta P. et al., 2013, ApJS, 208, 5 Owers M.S. et al., 2012, ApJ, 750, L23 Poggianti B.M, Bridges T.J., Komiyama Y., Yagi M., Carter D., Mobasher B., Okamura S., Kashikawa N., 2004, ApJ, 601, 197 Poggianti B.M., Fasano G., Omizzolo A., Gullieuszik M., Bettoni D., Moretti A., Paccagnella A., Jaffe ´ Y.L. et al., 2016, AJ, 151, 78 Potman M., Coe D., Ben ´Ãƒâ€žÃ‚ ±tez N., Bradley L., Broadhurst M., Don- ahue M. et al., 2012, ApJS, 199, 25 Rangarajan F.V.N., White D.A., Ebeling H., Fabian A.C., 1995, MNRAS, 277, 1047 Roediger E. Hensler G., 2005, aËÅ ¡, 433, 875 Scoville N., Arnouts S., Aussel H., Benson A., Bongiorno A., Bundy K., Calvo M.A.A., Capak P. et al., 2013, ApJS, 206,3 Sun M., Jones C., Forman W., Nulsen P.E.J., Donahue M., Voit G.M., 2006, ApJ, 637, L81 Sun M., Donahue M., Voit G.M., 2007, ApJ, 671, 190 Sun M., Donahue M., Roediger E., Nulsen P.E.J., Voit G.M., Sarazin C., Forman W., Jones C., 2010, ApJ, 708, 946 Tonnesen S. Bryan G.L., 2010, ApJ, 709, 1203          Toomre A. Toomre J., 1972, ApJ, 178, 623 Toomre A., 1977, in TheevolutionofGalaxiesandStellarPop-ulations, Ed. Tinsley B.M. Larson R.B., Nep?w Haven: Yale University Observatory, p401 Veilleux S., Bland-Hawthorn J., Cecil G., Tully R.B., Miller S.T., 1999, ApJ, 520, 111 Vollmer B., Cayatte V., Balkowski C., Duschl W.J., 2001, ApJ, 561, 708 Vollmer B., Braine J., Pappalardo C., Hily-Blant P., 2008, aËÅ ¡, 491, 455 White D.A., Fabian A.C., Forman W., Jones C., Stern C., 1991, ApJ, 375, 35 Yagi M., Yoshida M., Komiyama Y., Kahikawa N., Furusawa H., Okamura S., Graham A.W., Miller N.A. et al., 2010, AJ, 140, 1814

Underground Economy :: essays papers

Underground Economy The author of the article describe the illicit CD market that is taking place in Ukraine. He explains that 95% of the CDs shipped out the Ukraine are illicit, the producers of those CDs are not just burning low quality CDs, they are even producing their own polycarbonate discs with their own logos as a mark of quality. The International Federation of Phonographic Industry (IFPI), which is actively looking for pirates that counterfeit CDs, seems to be desperate regarding fighting piracy in Ukraine as the law are inadequate and the Ukrainians have little or no knowledge of intellectual property. Those Ukrainians producing illegal copies of CDs are involved in the Ukrainian and European underground economy as they are making profit out of an illegal activity. The author give the example of a copy of Microsoft Office XP CD which cost $ 2.20 in Kiev and the original copy cost $ 580.00 in the USA. Those huge differences in prices are diminishing the profit of companies selling their products on CDs and they are therefore paying less taxes to the government where they are operating. The author of the article conclude by saying that Ukrainian government doesn’t have the will to terminate the illegal copies of CDs as the manufacturer employ lobbyists that exploit the unstable political environment to derail any move from the government to terminate their activities. Furthermore it seems to be very difficult to stop the counterfeiting of CDs as they are on the market before the legitimate versions are released. The author compare the battle against piracy like the war on drugs, one of the similitude is probably the shadowy organized-crime customers that both activities have in common. I believe like the author that it is quite impossible for international companies to sue any of the CD counterfeiter if the Ukrainian government doesn’t take an active part in the banishment of those factories. I also don’t believe that it is the government number one matter of problem, as we know that it is a country that has been going through the communist year and just got out of it, and there are many other important issues that are challenging the country and its government. Underground Economy :: essays papers Underground Economy The author of the article describe the illicit CD market that is taking place in Ukraine. He explains that 95% of the CDs shipped out the Ukraine are illicit, the producers of those CDs are not just burning low quality CDs, they are even producing their own polycarbonate discs with their own logos as a mark of quality. The International Federation of Phonographic Industry (IFPI), which is actively looking for pirates that counterfeit CDs, seems to be desperate regarding fighting piracy in Ukraine as the law are inadequate and the Ukrainians have little or no knowledge of intellectual property. Those Ukrainians producing illegal copies of CDs are involved in the Ukrainian and European underground economy as they are making profit out of an illegal activity. The author give the example of a copy of Microsoft Office XP CD which cost $ 2.20 in Kiev and the original copy cost $ 580.00 in the USA. Those huge differences in prices are diminishing the profit of companies selling their products on CDs and they are therefore paying less taxes to the government where they are operating. The author of the article conclude by saying that Ukrainian government doesn’t have the will to terminate the illegal copies of CDs as the manufacturer employ lobbyists that exploit the unstable political environment to derail any move from the government to terminate their activities. Furthermore it seems to be very difficult to stop the counterfeiting of CDs as they are on the market before the legitimate versions are released. The author compare the battle against piracy like the war on drugs, one of the similitude is probably the shadowy organized-crime customers that both activities have in common. I believe like the author that it is quite impossible for international companies to sue any of the CD counterfeiter if the Ukrainian government doesn’t take an active part in the banishment of those factories. I also don’t believe that it is the government number one matter of problem, as we know that it is a country that has been going through the communist year and just got out of it, and there are many other important issues that are challenging the country and its government.

Batter my heart, three-person’d god - John Donne :: English Literature

Batter my heart, three-person’d god - John Donne 1. The paradox in the first quatrain is that god is supposed to be a good person but in this poem he isn’t. The speaker wants god to destroy him and remake him so he could have chance at salvation. The three person’d god represents the ways in which god will manifest his power in the task of giving the speaker salvation. The speaker is compare to an usurped town in may ways. The speaker is compared to a land were two political parties are having a conflict. In the parallel lines 2 and 4 knock and break represent god and how he uses direct force. Breath and blow represent the holy spirit and how it is some thing you can make. A spirit is not something you can feel. Burn and shine is Jesus and how he enlightened the people. The pun is how the heart represents the speakers believes. No matter what god does he cant change it. So he tells god to beat him into salvation. 2. The speaker compares himself to and usurped town where there is conflict. God is the minor political party or train of thought and the usurper is the devil who is the dominating party. Reason plays a big part because as in partisan faction, citizens have the choice to chose their beliefs. The speaker is saying his reason is leaning him towards the devil. This reason however is weak because god has absolute power and can change it at any time. 3. The speaker compares himself to an unfaithful wife who has been caught and is taking her punishment willingly. The speaker also compares god to the absolute power of the husband in that era. The enemy is compared to the devil who is the man that the wife is having

Turmoil of Milton’s World Reflected in Milton’s Paradise Lost Essay

The Turmoil of Milton’s World Reflected in Paradise Lost "To explain the ways of God to men" (Invocation, 26) Milton loftily proclaims his goal in writing Paradise Lost. He will, he asserts, clarify many ambiguities of the Bible itself. Thereby begins one of the greatest epic poems in literary history – and the war of the sexes is raised to new heights. Milton claims to be the mouthpiece of God. If so, God was quite the rhetorician, not to mention misogynist. A being of absolute reason, he fails to understand how his reasonless creations can be devoid of allegiance to his person. A strict and orderly God, he brings a case against his own brain-children, and thus condemns himself. Allegiance is a key issue in untying the political knot fastened in Paradise Lost. Allegiance between creator and created, between king and subject, between man and woman. Adam and Eve owe God allegiance for their lives. Genesis doesn’t address this; the idea is implicit in the text. In Genesis, we are led to believe that God wished for his creations to be faithful and obedient in accordance with his wishes. Milton, in personifying God and the first human beings, takes this concept one step further. In bringing God down to man through the vehicle of the epic poem, Milton attributes to God the capacity for reason. God does not act arbitrarily: each action is planned with a specific end in mind. Loyalty is important because it can be used, in the field of reason, to prove innocence. Innocent beings have no understanding of inferiority, power, or debt; and therefore no grasp of even the necessity for loyalty. Milton’s God is a God of reason – but his creations, Milton asserts, were wholly innocent. The question, then, that Genesis poses and Milton a... ... New York: W.W. Norton & Company, 1993. Crossman, Robert. Reading Paradise Lost. Bloomington: Indiana University Press, 1980. This book is the experience of reading Paradise Lost as Robert Crossman reads it. It was helpful in that it offered a clear interpretation of the events and passages in the book. Crump, Galbraith M. Approaches to Teaching Milton's Paradise Lost. New York: The Modern Language Association of America, 1986. This book was meant as a guide for teachers trying to teach Paradise Lost, but in doing so contained some interesting ideas on the work and its purpose. Patrides, C.A. Milton's Epic Poetry. Baltimore: Penguin Books, 1967. This book is a collection of essays concerning Milton's Paradise Lost. The reading of it helped to expand my understanding of the scope of the book, and it also helped to thoroughly overwhelm me.

Abu Dhabi Police Essay

The focal point of this paper is to develop a plan that would be successfully implementing an organizational change management system within Abu Dhabi Police department in order to increase its efficiency, development and achieving future objectives. It should be stated that at the moment there are several problems related to the issue and it is needed to overcome those in order to gain more mileage in the long run. The main aspect of this problem lies in the traditional form of police and investigation procedures that are taken into account and executed with comparatively lesser efficiency. This could also be sated that the functionality of the Abu Dhabi police department is more ancient in approach and there is an essential need for the department to catch up with the rest of the world in terms of technology implementation and efficiency evaluation. Furthermore, it is also essential to look into the aspects of administrative reconstruction as the department is unable to work up to its true potential with the administrative structure located at a medieval scenario. (Lamb, 2004, 69) Thus it can well be stated that the problem with Abu Dhabi police is not only with it’s below the par utility and efficiency but also is related to the ill formulation of the administrative system. Quite logically, the department is in extreme necessity of finding solutions for negating these problems. It should be stated that at the moment there is a five step remedy to this malady. Firstly, it is essential to understand the present management of Abu Dhabi police department and identify the key areas of improvement. Similarly, it is important in the aspect of researching the past to get an understanding about Abu Dhabi Police department’s status and importantly eliminating the risk of following the old mistakes. Then, it should be noted that a wide study is incorporated with a variety of methods of change management practices and their applicability in Abu Dhabi Police department. Furthermore, it is important to investigate the potential of alternative methods of change management and the most advantageous will be launched. Lastly, a strategy would be created with prospective enhancement that can be introduced, understanding the structure and working culture currently present in Abu Dhabi police department. It should be mentioned that the theoretical framework will involve police and public interviews, police and public’s strategic interview, historical records, secondary research through the Internet and university database, it will also use strategic analysis tools for development of the evaluation of the best method between coercive and consensual policing. In this context it should also be mentioned that the purpose of the project is formulated in a mutually beneficial way such that from an academic perspective there would be a huge gain in the context of valuable experience, and simultaneously add value by providing insights as well as a fresh & objective outlook on any matter relevant to the social context. Research design will follow the following method or schedule. Firstly the participants will be trained about data collection techniques and tools to be used to collect the relevant information. The participants will be including police officers, data collection officers, team leaders and other resourceful personnel. Secondly the areas to be interviewed will be identified and accessibility determined. These areas to be sampled for the research can range from 10-16 of these areas, say 5 will be where coercive policing will be imposed and other five consensual policing can be applied. The period of the research can take a period of minimum 3 months and a maximum of 6 months of which during this period data will be collected. Thirdly the data so collected will be prepared as a report of findings. Finally, the final reports will be analyzed and evaluation for determination of the difference between consensual and coercive forms of policy. The different is supposed to put more emphasis on the difference. In order to attain the objectives it is essential to recognize the existing practices in Abu Dhabi police department and also in the modern police departments of countries like USA, Germany, UK, Australia etc. This will be done by individual interviews of the officials in Abu Dhabi and the through questionnaires from other corners of the world. Primary research will be persistent on personal interviews with Abu Dhabi Police department officials that will give an inner view of the present positing and future goals. This will also be a key basis of understanding the indolence for change. This will help in bringing out the indication of the present managed system in Abu Dhabi police department organization. Ultimately the clients will help in providing the true print of Abu Dhabi Police department’s working and key areas of improvement. Data presented from this research will assist to evaluate the best practices model and the actual working. This will help in indicating the difference and the reason for Abu Dhabi police department organization to implement a successful change management. Abu Dhabi Police higher officials will be randomly selected with favorable time and place for the interviews to be carried out. Finally the research will be focused on the historical data by looking at the Abu Dhabi Police department’s strategy in the past. If any failure or any glitches are to be found in companies strategy they will be pointed in this research. This will help the writer to understand the Abu Dhabi Police department’s goals in the past and their implementation process. It is necessary to design a new experiment that test the statistical method. For the purpose it is necessary to collect a complete data of the site that would include different religion, ethnicity or gender. An open meeting with police as well as the general mass or public would be very relevant in this context in the initial stages. The mixed gender of male and female Police and public could well be excluded as that would complicate matters in the context of gender variable juxtaposed with other pre mentioned variables but considering other dependable factors sustaining it would yield to be fruitful in the long run. Data would be collected in relation to the gender, color, religion of the potential customers in respect to the composition of the management under the same parameters. All these variables are considered as very relevant and important features of the statistical method and it is to be seen if these aspects are fundamentally acceptable in practical world and it could well be mentioned that social service, especially security service industry, are a very relevant manifestation of the social dimensions. As a result if the test is carried out in a proper manner with proper calculations of the population involved then there is no reason that the results would be both logical and true at the end consideration. In accordance to the basic test selected it could be stated that it could be possible that the outcome would be relatively logical in the sense that it would ultimately follow the trends of social facilitation theory in marketing and thus it would be agreeable with the statistical method and thus a well formulated marketing strategy can be constructed for the benefit of the Police and public alike as a definite method can be chosen between coercive and consensual policing. However, it should be stated that there would be few independent variables in the context of the test that could not be explained by the statistical method statements. Here the ethical consideration of the potential Police and public or the ethnic background of the potential Police and public may not be a very relevant factor. Thus there could be some flaws to the collection of the population but if these aspects are kept in mind then the shortcomings would easily be negotiated during the ultimate computations. As a result the test would appear to be a full proofed measure that would be able to define and prove the fundamental aspects and statistical method applied. It should be noted that the access to the research participants is both easy and hard. In terms of the public interview it would be relatively easy to identify and access but the difficult part would be to frame the questioner in accordance to the color and creed of the participants in general. In case of the police interview there would be more homogenous pattern in terms of the questioner but the difficult part would be to gain access. For the purpose it would be arranged to acquire permission from the hope department. Data will be collected using two different methods. The first will be interviews, which involve citizens, police officers from the sampled areas. This is an advantage in that feedback can be obtained instantly. The second will be use of questionnaires, which will be administered to the sampled areas. The questionnaire to be used will be the opened type. The advantage of this method is that the information obtained can be quantified to reflect that the sampled group as part of the entire population. The advantage is that it is easier to analyze data collected through questionnaire method. It should be noted that reliability for the researcher was achieved in the assurance that only a specified group of men and women were utilized in regard to the research. That group was focused mostly on customers and retails along with administrative personnel. This gave the research a more focused view of the research goal. The validity was managed as a result of this focus and emphasized in the considerations involved in the data collection, variables, and sampling methods. Privacy and confidentiality methods included assigning numeric and alphabetic coding to each responding questionnaire. This ensured anonymity in regard to the researcher and the subjects of the research process and a thorough qualitative method would be used during data analysis. The basic advantages of qualitative measures are multifold. Firstly, it presents a completely realistic approach that the statistical analysis and numerical data used in research based on quantitative research cannot provide. Another advantage of qualitative measures is that it is more flexible in nature in terms of collected information interpretation, subsequent analysis and data collection. It also presents a holistic point of view of the investigation. Furthermore this approach of research allows the subjects to be comfortable thus be more accurate as research is carried on in accordance to the subject’s own terms. The best statistical method would be to interview long well formulated day to day working procedure at a specific and well selected location. Throughout the procedure, it should be noticed whether there are specific variables within the testable population or not. These variables would be extremely important while evaluating the basic data in the final stages where the adjustments would be made to the formulated data in accordance to the observations. As a conclusion to the outline of this paper it can always be stated that Qualitative research is a process that includes interpretative paradigm under the measures of theoretical assumptions and the entire approach is based on sustainability that is depended on people’s experience in terms of communication. It can also be mentioned that the total approach is based on the fact that reality is created on the social formulations. It can also be mentioned that the basic target of qualitative research is instrumented towards social context under normal circumstances where it would be possible to interpret, decode and describe the significances of a phenomenon. The entire process is operational under the parameter of interpretative paradigm that can minimize illusion and share subjectivity under contextualization, authenticity and complexity of the investigation. References: Lamb, Davis; (2004); Cult to Culture: The Development of Civilization on the Strategic Strata; National Book Trust; Wellington

Compare of the Poets Present Emotions in the Poems In Paris With You and Ghazal

In these poems, the poets use a range of techniques to present feelings and emotion from the point of the speaker. Ghazal is in the style of a traditional Persian love poem, which puts forward powerful imagery and metaphors, in an attempt to summarise the emotion of love, while In Paris With You is a playful attempt to woo a previous lover in a more informal, colloquial way. Ghazal, as mentioned before, is written like a love poem. However, one may consider it an example of role reversal- unusually; it is written from the point of view of a woman, not a man.Although it is not a sonnet, the form of poem is a Ghazal- this is a type of song, of mystical love poetry: we can thus compare it to a sonnet in the way that love is explored as a theme. It is structured in rhyming couplets- these can be described like poems themselves, as they capture the speaker’s strong feeling of attachment. These also contain refrain words, which help to drive in the points being made, such as â€Å" me†, which forms part of the weak rhyme scheme.The love in the poem can be seen in the first stanza- â€Å"If I am the grass and you the breeze, blow through me/ If I am the rose and you the bird, then woo me†. These examples of natural imagery mean we can see how the idea of the speaker and the person they address being together is beneficial- in fact, drawing from the imagery, we could go further and say that the idea is a natural (good) thing. Another emotion present is longing. This is the feeling of desperation to be with the other person talked to.Focusing on the language used, Ghazal makes extensive use of metaphors to explore the relationship between the speaker and the person they feel love for. Many of the metaphors are in the form of pairs of items or objects that complement each other, reflecting the way in which the speaker sees the relationship. For example, â€Å"what shape should I take to marry your own, have you- hawk to my shadow, moth to my flame â €“ pursue me? † showcases the idea that the speaker is willing to transform to suit the other, in â€Å"†¦what shape†¦Ã¢â‚¬ . This could also be a cue to the reader that the writer is perhaps lacking in some confidence..Another example is â€Å"If you are the rhyme and I the refrain don’t hang/ on my lips, come and I’ll come too when you cue me†: using enjambment to keep the poem flowing like a song. Also, the two sides of a relationship are likened to being like the â€Å"rhyme† and â€Å"refrain†, which suggests a sense of the two people being one unit together. This refrain could be the word â€Å"me†: because it appears so frequently in comparison, it could be a representation of the lover showing inferiority to the one she loves, and desperation. In Paris with You is a poem with a theme of longing also.The speaker is this time a man recounting a relationship he had moved on from. Perhaps this could have been partly due to a certain partiality to drinking alcohol, which we are told about in â€Å"And I get tearful/when I’ve had a drink or two†. â€Å"I'm on the rebound† shows that it must have been rather long-term, if he is describing a recovery from it. Unlike Ghazal, which is less clear about the outcome, In Paris with You suggests that the relationship is a reality. The poem, unlike Ghazal, is made up of two stanzas of about 5 lines, which deal with the run-up to the situation, and then a longer one in the middle,.It could be argued that this represents a pause for thought, as then the mood, or tone, of the poem changes, as in the next two stanzas, the speaker focuses on enjoying the present, such as â€Å"that crack across the ceiling/ and the hotel walls are peeling/ and I’m in Paris with you†, which shows that the speaker does not care for the surroundings when he is with the woman he loves. Indeed, this could be described as the summary of the poem, o r meaning- us being together is far more important than being in traditional romantic and beautiful locations, such as the Notre Dame (more beautiful than romantic), which he promptly tells to â€Å"sod off†.In terms of language, the opening is not like Ghazal’s in the respect that it starts with the negative â€Å"but†, to discourage the person he is talking to from â€Å"talk(ing) to me of love†. This is an opportunity to recognise the colloquial nature of the poem, such as the use of the phrases â€Å"an earful†, and â€Å"sod off to sodding Notre-Dame†. This contrasts heavily with the more formal, overwritten tone present in Ghazal. We can also see this as the speaker makes words to carry on his rhyme scheme, such as â€Å"wounded/ marooned†, which brings a playful nature.Similarly, the final stanza draws heavily on the phrase â€Å"in Paris with you†, to show the importance of being with the person he wants to be with, and then â€Å"am I embarrassing you? † is used to add to the teasing nature of the tone. Looking to the tone, which we have just looked at, I believe that another emotion brought forward is playfulness, in the way that more orthodox methods of seducing people are turned down in favour of just being with each other, albeit in a way that uses references to â€Å"embarrassing† ideas about romance, and love poems.In conclusion, the two poems Ghazal and In Paris with You deal with the same topics of love and longing, using techniques such as imagery, contrast, and metaphor achieve these pictures, but the latter feels more like a pastiche to the first in the way that its colloquial and abrupt humorous tone is a juxtaposition to the comparatively formal of the first.

Critically Analyze the Following Claim: ‘Class Is No Longer Relevant in Australia in the Twenty-First Century’

Critically analyze the following claim: ‘Class is no longer relevant in Australia in the twenty-first century. ’ The relevance of social class in Australia has been disputed as to whether it still exists. There are a lot of arguments and opinions on this issue but class inequality is evidently still in force in twenty first Australia. Contemporary Australian society discriminates the difference of social classes through economic status, education and geographic location.The power struggle in social class is analyzed in theorist Karl Marx’s â€Å"Communist Manifesto† where the Bourgeois (ruling class) and the Proletarians (working class) are discussed as to how classes are shaped in societies which can then be applied in twenty first century Australia. Bill Martin’s â€Å"Class† discusses the distinction between working and middle class in Australia today compared to a generation ago in accordance to materials, geographic location and employmen t.In Australia, economic status, employment and property ownership refers to what the person earns and owns which are very important factors in determining social classes. A person’s economic status is determined by their employment and employment in Australia is classified in white and blue collar workers. The white collar workers fall into the ruling class category where they obtain degrees, maintain high wage and use their skills/knowledge from the degree to obtain an office job wearing white dress shirts (which is where the word white collar is derived from).Whereas the blue collar workers fall into the low-middle class category, where the workers are employed as tradesmen or laborers as they have physical work with standard wage which don’t require high qualifications. These two main tiers of collars are implemented in twenty first Australia which is a fundamental aspect of determining social class as the white collar workers have wealth putting them in power of t he working class which verifies that there is underlying capitalism.In relation to economic status, property ownership is another fundamental aspect of determining a person’s class in Australia as it defines the person’s wealth. Property can consist of houses, investments, cars, savings accounts, land and any materials with value. Property ownership was Marx’s main argument in determining social class as, â€Å"The bourgeoisie cannot exist without constantly revolutionizing the instruments of production, and hereby the relations of production, and with them the whole relations of society,† (Marx 771) which argues that if the person doesn’t have some form of ownership then they didn’t have resources for production which would classify them as a laborer putting them in the working class. Property ownership distinguishes the two classes from each other in Australia as it is seen through the works of the Labor party as it has a large group of pe ople in the working class leaving them to manage capitalism.Marx’s infamous quote, â€Å"The history of all hitherto existing society is the history of class struggles,†Ã‚  (Marx 79) makes it clear that class struggle is needed to create the division of classes. Jim Kemeny writes â€Å"Australian capitalism highlights the way in which the Australian ruling class is likely to differ from those of other middle-sized capitalist societies,† (Kemeny 103) where the ruling class in Australia is weakly developed in retrospect to the economy.Capitalists have the capital and the workers own their power to labor which only receives one third of their produce as the other two thirds are taken by the capitalists which keeps the classes separated; this is evident in Australia due to technological advancements where the laborers are being replaced by technology putting people out of jobs which explains how the rich get richer and the poor get poorer.This division of labour in Australia can also be analysed by sociologist Max Weber as he thought Marx’s theory was too simplistic, indeed there were different classes but they were classed according to property, power and prestige (class, power and status). Weber’s theory also applies in Australia as Australians value mateship and children have the opportunity to enter a different class through their manner of speech, respect in the society, education achievements and social leisure habits which can increase their â€Å"life chances†.Power is doing anything you desire while being able to control other people whether they object or not. In Australia, power is exercised by the government, controlling the nation’s rights and keeping the classes separated. Prestige/status is how the person is perceived in the community/society. Property will usually lead to prestige and power but property is mostly held by the people working in white collar jobs. Social welfare is provided by the Austr alian Government to the working where Centrelink provides economic assistance for the people out of work.The income support system can help with Austudy Allowance,  Carer Allowance,  Disability Support, Pension Payment, Orphans Allowance, Newstart Allowance,  Maternity Payment,  Parenting Payment, Special Benefit Payment and  Youth Allowance  which are conducted by a means test (which is usually taken advantage of). The article â€Å"Welcome to bludgetown† by Caroline Marcus discusses the different nationalities and demographics of certain suburbs that rely on Centrelink classing them in the lower tier.The geographic location of where people reside has an effect on whether they are categorized into working or ruling class as the suburbs of Greenacre, Punchbowl and Villawood (South-west Sydney) would rather accept Centrelink than find a job. The article reads â€Å"Mr Trad said Muslims suffered from discrimination when it came to applying for jobs. ‘I wonder if this gentleman has ever experienced discrimination in the workplace himself,’ he said. ‘Certainly, people with a Muslim-sounding name are not given the same opportunities †¦ s people with an Anglo-sounding name. ’† (Marcus pars. 16-18) Discrimination can be a possible explanation as to why some of these cultural groups are not employed in this multicultural country which ultimately disadvantages their children as they are automatically categorized in the working class but their geographic location has also disadvantaged them because they are influenced by other people from their culture making them reluctant to even apply for employment which leaves them to stay in the working class.Geographic location can affect a person’s class which is evident in â€Å"Class† by Bill Martin which tours around in three shopping centres in Adelaide. Martin identifies the different stores, cars, clothing, education and occupation in regards to three d ifferent suburbs. The ruling class is evidently Eastside where most of the stores are upmarket, half the cars in the car park are mostly European, clothes are chosen carefully, their children go to private schools and have a dominant occupation of doctors, lawyers, accountants etc.Putting them in the ruling class as opposed to Rosedale where there are discount shops through connected malls, most of the cars in the car park are Holdens, Fords and Toyotas, their clothes are old, their children attend public schools that are trying to defeat drug problems with very few that attend university and have a dominant occupation of public servants, delivery drivers and secretaries.Martin clearly distinguishes between the two suburbs in their two tiers of class. It is evident that the children growing up in Eastside are a lot more likely to become members of the ruling class and the children being raised in Rosedale are more likely to stay in the working class as they are almost destined to ca rry out the same outcome as their parents and very few follow through to higher education to obtain high wage and status.In Australia, the media plays an important role in distinguishing between the classes in Australia as stereotypes are portrayed in the media to make it obvious that class is still an existing factor in society. The Australian nation may want to believe that there isn’t class discrimination and that everyone is middle class but this claim is evidently false which can be understood in the article â€Å"Whatever happened to the classless society? by Thornton McCamish. The article identifies Australians as an unequal country in reference to class discrimination as McCamish writes about how Australians are portrayed in TV shows such as Summer Heights High where Jamie, a high class ‘snob’ attends a public high school for a semester as opposed to her private girls college and assumes that everyone attending public schools are living in poverty (†˜povvo’) classing them in the working class.This assumption isn’t widely made or accepted among Australians as the TV show exaggerates reality but people watching the series may take that into account and might reassess their social status in terms of school placement but the fact of the matter is working class parents can only afford public schools which have higher risks to drug abuse and teen pregnancy. It shows that Australia went from a very egalitarian country to a country with underlying class discrimination issues, that may not necessarily be evident as to where the dividing line is but it is present in twenty-first century Australia.The article reads â€Å"Ignoring class didn't make socio-economic divides go away, just harder to get your head around. Especially once the Howard government took to our class structure with a rhetorical Dymo, replacing labels such as †ruling class† or †working class† with new ones such as †elitesâ⠂¬  and †battlers† – a category that seemed to embrace anyone with a swinging vote. Meanwhile, our very rich (not part of the †elites†, puzzlingly) got very much richer. † (McCamish pars. 6)Masking the names of the ruling or working class doesn’t make class discrimination irrelevant and evidently ignoring the divides doesn’t make class irrelevant either. To conclude, it is obvious that class is still an existing factor in twenty-first century Australia making it relevant especially due to the socio-economic status regarding employment, property ownership and geographic location. Conducted studies by the ABC show that 86% of Australians believe that class is still relevant in Australia.Theories from centuries ago about social classes are still relevant when comparing social discrimination to Australia’s social classes making it therefore evident that it still exists. WORKS CITED Henslin, James M. Global Stratification,  "Essentials of Sociology: A-Down-To-Earth Approach Eighth ed. Boston: Pearson/Allyn and Bacon, 2009. 170-95. Print. Kemeny, J. Capitalism- the Australian way, Arena  (Melbourne) 1978. No. 51, 94-103. Print. Marcus, Caroline. â€Å"Welcome to Bludgetown, Western Sydney. The Daily Telegraph 10 Jun. 2012. Print. Martin, B. Class, in P. Beilharz and T. Hogan (eds. ) â€Å"Sociology: Place, Time and Division†, South Melbourne: Oxford University Press, 2006. pp. 402-405. Print. Marx, Karl – Engels, Friedrich. The Communist Manifesto. United Kingdom: Penguin Books, 2002. Print. McCamish, Thornton. â€Å"Whatever happened to the classless society. † The Age 16 Aug. 2009. Print. Weber, M. The Protestant Ethic and the spirit of Capitalism, Unwin Hyman Limited London- 1985. Print.